Search results for: 'interfacing arduino'

TSD-10 Thermometrics Turbidity Sensor Features The TSD-10 turbidity sensor measures the turbidity using optics and light passing through the liquid. This sensor has an analog output and requires an ADC converter. It is used in washing machines to measure the density of water turbidity. By using an optical transistor and optical diodes, it measures the amount of light coming from the source of the light to the light receiver, in order to calculate water turbidity. This sensor has a waterproof body. Note You ...

4 Channel Infrared Module Features This module has 4 IR transmitter and receiver pairs that can be used to detect black and white color as well as obstacles. Each channel has digital voltage output. You can adjust the sensor’s sensitivity using the on board potentiometers. Pinout You can see pinout of IR module in the image below. Required Materials Hardware Components Arduino UNO R3 × 1 4 Channel IR Obstacle Avoidance Proximity Module × 1 Male to Male jumper wir...

TCRT5000 IR SENSOR Features The TCRT5000 sensor consist of an IR transmitter and IR receiver. When the proper voltage is applied to the infrared transmitter, it transmits and emits infrared waves. When these waves collide with an object, the infrared receiver, which is a phototransistor, receives the waves. A phototransistor works like a normal transistor, except that its base is excited by light. Note This sensor works best for objects in the range of 0.2 to 1.5 cm. You can download the datashe...

R301T Fingerprint Module Features This is an integrated fingerprint module with image collecting and algorithm chip together. It works in different conditions of the fingers, whether the fingers dry, wet, light texture, or old. It works in a variety of applications such as access control, safety deposit boxes. This fingerprint module communicates with the controllers with UART, Connect to any microcontroller or system with TTL serial, and sends packets of data to take photos, detect prints, hash, and se...

YZC-161B Load Cell Sensor Features Load cells are electronic sensors used for measuring weight and force. Load cells are made of alloy and a number of tensile strengths. When force is on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. The capacity of a load cell is the maximum amount of force it can withstand. Notes To measure tensile strength changes, we use the HX711 module. It is a high-precision analog-to-digital converter...

SHT30 Temperature & Humidity Sensor Features SHT30 is a digital temperature and humidity sensor. This module uses I2C communication and the 2 SCL and SDA pins are used to communicate with this sensor. This sensor is ideal for temperature and humidity sensing.  Temperature measurement range: 0°C to 65°C/ Accuracy ±0.3°C Humidity measurement range: 0-100% RH/ Accuracy ±3% RH You can download the datasheet of this module here...

SHT35 Temperature and Humidity Sensor Features SHT35 is a digital temperature and humidity sensor. This module uses I2C communication protocol and the 2 SCL and SDA pins are used in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40°C to 90°C/ Accuracy ±0.2°C  Humidity measurement range: 0-100% RH/ Accuracy ±1.5% RH You can download the datasheet of this module here. [wpdm_packag...

L298N Motor Driver Module Features The L298N module is used to drive DC motors with a maximum current of 2 amps. The L298N driver module is easy to use. It contains a good filter circuit and gives you access access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, which is handy to drive a stepper motors. This driver needs a logic vo...

GML692 Load Cell Sensor Features Load cells are electronic sensors used to measure weight and force. The structure of a load cell is made of an alloy body and a number of tensile strengths that change value by applying force and return to their original value by removing force. The capacity of a load cell is the maximum amount of force it can withstand. Note To measure tensile strength changes, we use the HX711 module. It is a high-precision analog-to-digital converter. Note 2 If you w...

YwRobot Vibration Sensor Features Tilt sensors detect vibrations by having small metal spheres inside. You can use the generated signal to make an alarm if there is vibration. The output of this sensor is a digital signal. This Vibration Sensor is easy to interface with Arduino and you can use it to detect vibration. YwRobot Vibration Sensor Pinout This sensor has 4 pins:5V: Module power supply –2.4 V to 5 VGND: GroundOUT: OutputYou can see pinout of this module in...