Search results for: 'interfacing arduino'

TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...

R305 Optical Fingerprint Features R305 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. R305 uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 980 fingerprints. It features a USB cable so you can...

Load Cell Sensor Features Load cells are electronic sensors that are able to measure weight and force. The body is usually made of aluminum, alloy steel, or stainless steel which makes it very sturdy but also minimally elastic. This elasticity gives rise to the term "spring element", referring to the body of the load cell. When force is exerted on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. Load cell capacity is equal to the maximum am...

MPU9250 + BMP280 Module Features This IMU module is a small board which all the sensors required for 10 degrees of freedom are placed in. This module communicates with the Arduino or microcontrollers via the I2C interface. Using the existing FreeIMU functions and source code, you can easily use this IMU as an AHRS system in flight controls. You can use this module in VTOLs, model airplanes, UAVS, and also industrial and medical devices. GY-91 Module Pinout This s...

NEO-7M GPS Module Features GY-NEO-7M module is an advanced GPS module that supports UART communication protocol with active antenna. You can interface this module easily with any microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter.This module can receive data and then calculate the geographical position with a very high accuracy and speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / QZSS, the module has inter...

NEO-8M GPS Module Features The GY-NEO-8M module is an advanced GPS module based on uBlox m8N that supports UART communication protocol with active antenna. You can interface this module easily with a microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter.NEO-8M can receive information and then calculate the geographical position with very high accuracy and fast speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / ...

NEO-6M GPS Module Features The GY-NEO-6M module is an advanced GPS module that supports UART communication protocol with active antenna. You can interface this module easily with any microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter. This module can receive information and then calculate the geographical position with very high accuracy and fast speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / QZSS, the modu...

GY-521 MPU6050 Features The GY-521 is based on the MPU6050 sensor that contains both a 3-Axis Gyroscope and a 3-Axis accelerometer. It uses I2C communication protocol and you can read MPU6050 outputs with SCL and SDA pins. Note The MPU6050 sensor has a digital thermometer in addition to the gyroscope and accelerometer. You can download the datasheet of this module here.[wpdm_package id='18153'] GY-521 MPU6050 Sensor Pinout This sensor has 8 pins:VCC: Mod...

DWM1000 Transceiver Module Features DWM1000 is an IEEE802.15.4-2011 UWB-compliant wireless transceiver module based on DecaWave’s DW1000 IC. DWM1000 measures location of objects using Real-Time Location Systems (RTLS) to a precision of 10cm indoors. This modules features a high data communication rate, up to 6.8 Mb/s, and has excellent communications range of up to 300m. It is also used in Wireless Sensor Networks (WSN). Tip You need at least 2 pieces of this sensor to use it. It is better ...

L298N DC Motor Driver Feature L298N module is used to drive DC motors with a current of less than 2 amps. This module is easy to use. It contains convenient filter circuit and have access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, so it can be used to drive stepper motors too. This driver needs a logic voltage supply to drive t...