Search results for: 'interfacing arduino'

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

TCRT5000 IR Sensor Features This sensor which is mostly used for line tracking, works like motion detection sensors. It is based on TCRT5000 IC. The TCRT5000 is a sensor that emits infrared light continuously. If the transmitted wave is not reflected or is reflected very poorly, the output will be LOW. If you put an object in front of this sensor, the output becomes HIGH. Note Black color absorbs the transmitted IR radiation and reflects it very poorly. So the output will be LOW if there is ...

AD8232 ECG Module Features The AD8232 sensor can provide you to monitor electrocardiographic or ECG signals. Analyzing these signals prepares useful information about heart function, such as heartbeat rate, heart rhythm, and other information regarding the heart’s condition. This module can be connected to a microcontroller on one side and to specific parts of body on the other side using 3 special electrodes. The signal received through the electrodes can be seen in the analog output of the sensor. ...

Heart Rate Sensor Module Features This module is designed for educational and entertainment purposes and is used to detect Cardiovascular pulse wave with finger. It uses a PPG (HRM-2511E) probe for data transmission. This sensor uses infrared light technology. If the amount of blood changes, the intensity of infrared light will change as well. This heart rate sensor has two analog and digital outputs and one LED for the digital output. You can see the heartbeat more accurately by the analog output. Featur...

MT8870 DTMF Decoder Module Features DTMF stands for Dual-tone-multi-frequency. This module is for sending signals using the voice-frequency band over telephone lines to switching centers. This module has two important applications: First, to specify the desired number to telecommunication through switching centers; second, it is capable of transmitting commands to these centers and other telecommunication devices. Technical specifications: Input voltage: 5V 5mm input jack LED to indicate the binary ...

Photoelectric Encoder Module Features Motors are used in a wide variety of applications such as robotics, industry, research and educational projects. In most of these applications, it is necessary to calculate the rotation speed, the direction of rotation and the position of the motor shaft. Rotary encoder modules can be used for this purpose. Rotary encoder is a type of module that converts rotation into electrical signals. The rotary encoder has two output pins: A and B. If the rotary encoder i...

AD9833 Signal Generator Module Features In many projects we need a signal with a specific waveform and frequency. The AD9833 signal generator module is a low-cost module for such applications. This module is capable of generating sine, triangular, square and half-square waveforms. You can adjust the frequency of generated signal from 1Hz to 12.5MHz. The communication protocol of this module is SPI. AD9833 Signal Generator Module Pinout This module has 7 pins:Ref: Re...

UVM30A UV Sensor Module Features Ultraviolet (UV) light is produced by sunlight. Gradual thinning of Earth's ozone layer has increased the amount of UV radiation which can lead to sunburn and other problems. UV radiation is a form of electromagnetic radiation with wavelength from 200 nm to 370 nm, shorter than that of visible light, but longer than X-rays. The UVM30A UV sensor module is used for detecting the intensity of ultraviolet radiation. This module has an analog output that changes with the int...

GUVA-S12SD UV Sensor Module Features Ultraviolet (UV) light is produced by sunlight. Gradual thinning of Earth's ozone layer has increased the amount of UV radiation which can lead to sunburn and other problems. UV radiation is a form of electromagnetic radiation with wavelength from 200 nm to 370 nm, shorter than that of visible light, but longer than X-rays. The GUVA-S12SD UV sensor module is used for detecting the intensity of ultraviolet radiation. This module has an analog output that changes wit...

DX-BT18 Bluetooth Module Features Bluetooth modules are a type of wireless communication modules that can be added to a project through serial or SPI communication protocols.The advantage of using Bluetooth modules is that they are easy to set up and use.The DX-BT18 module uses serial protocol for communication. Note All Bluetooth modules that use serial communication protocol support AT Commands, which are listed in the datasheet of each product. Download th...