Search results for: 'interfacing arduino'

L9110S Dual-Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual-channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are: The allowable continuous current for each channel: 800 mA The maximum allowable current: 1.5 A Power supply: 2.5V to 12V Note The two connected pins to each DC motor can be PWM or digital. If define...

Learn how to interface the BTS7960 43A high-power motor driver module with Arduino. This guide covers the key features of the BTS7960 motor driver, its pinout configuration, and provides step-by-step instructions for circuit connection and code implementation. Take control of your motors with this versatile and powerful motor driver. BTS7960 43A Motor Driver Features The BTS7960 is a high-current full-bridge motor driver module. The Key features are: Input voltage: 6V to 27V Maximum allowable current: ...

ULN2003 Stepper Motor Driver Features We usually use stepper motors when we need precise control of the motor shaft. These motors can be used in robot arm, 3D printers, CNC machines, etc. 28BJY-48 is a kind of stepper motor. In full step mode, these motors have a 1 to 64 speed reduction gearbox and eachfull 360 degree rotation consists of 32 steps. The ULN2003 driver is commonly used to control these motors. ULN2003 IC consists of 7 pairs of Darlington transistors, each pair can withstand 500mA and 50V. Th...

RepRapDiscount Full Graphic Smart Controller Features Using the RepRapDiscount Smart Controller, you don’t need a computer to control 3D printer anymore. In this shield, an SD card is used to transfer 3D design to 3D printer and store the G-Codes. This full graphic Smart Controller contains a 128 x 64 dot matrix LCD display. Using the rotary encoder on the board, you can move around in the device menu and access data. This display is compatible with ramps 1.4 controllers and can be run with marlin and rep...

DRV8833 Dual Motor Driver Features Today, speed and direction control of DC motors is very important and useful. The H-bridge circuit is one of the most common techniques to control a DC motor. The DRV8833 dual-channel module uses this technique to control two DC motors.This dual H-bridge motor driver can drive two DC motors, a stepper motor or other inductive loads.The driver supply voltage is 2.7 to 10.8V and the allowable continuous current is 1.5A and the maximum allowable current is 2A.Some common...

74HC4051 8-Channel Analog Multiplexer Features The 74HC4051 8-Channel analog multiplexer module can be used when there are many analog inputs in a circuit. In this case, one of these inputs needs to be selected and processed each time. This multiplexer can be used to select from 8 analog inputs. There are three S0-2 pins, which by giving appropriate values, one of the analog inputs is set as the output on the Z pin. 74HC4051 8-Channel Multiplexer Pinout This module ...

A4988 Stepper Motor Driver Features The A4988 stepper motor driver is intended to drive a bipolar stepper motor. Only by two pins, you can control the rotation direction and rotation steps. Each signal sent by the spin step pin, the motor rotates one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuous current per phase without cooling: 1AMaximum current per phase with cooling: 2AMotor voltage: 8 to 35 VThe minimum allowed pulse�...

TMC2100 Stepper Motor Driver Features The TMC2100 driver is one of the most popular stepper motor drivers available on the market. It works similar to the DRV8825 and A4988 drivers.This module is intended to drive a bipolar stepper motor. Only by using two pins, the rotation direction and rotation steps can be controlled. Each signal sent by the spin step pin, the motor shifts one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuou...

PN532 NFC RFID Module Features If you are experienced in electronics, you have probably heard of RFID (radio-frequency-identification) and NFC (near-field-communication). PN532 module is a kind of RFID-NFC module that uses I2C, SPI and HSU protocols for communication. This module is based on NXP PN532 IC. The key features are:Support I2C, SPI, high-speed UART (HSU) protocolsPCB design for antennaCommunication distance: 5 to 7cmRFID reader and writer supports the following:Mifare 1K 4K, Ultralight and ...

Focusable Red Line Laser Features This module emits a small intense focused beam of visible red light. This module can be used in fiber optic communications, laser test tools, surgical equipments, GPS tracking, etc. At the top of the laser there is a screw that is used to adjust the laser light. Some key features are:Operating voltage: 3VRequired current for module to be turned on: Less than 40mAOutput power: 5mWLaser wavelength: 650nm Note Since the required current is less than 40mA and the ...