Search results for: 'Motor driver'

A4988 Stepper Motor Driver Features The A4988 stepper motor driver is intended to drive a bipolar stepper motor. Only by two pins, you can control the rotation direction and rotation steps. Each signal sent by the spin step pin, the motor rotates one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuous current per phase without cooling: 1AMaximum current per phase with cooling: 2AMotor voltage: 8 to 35 VThe minimum allowed pulse�...

TMC2100 Stepper Motor Driver Features The TMC2100 driver is one of the most popular stepper motor drivers available on the market. It works similar to the DRV8825 and A4988 drivers.This module is intended to drive a bipolar stepper motor. Only by using two pins, the rotation direction and rotation steps can be controlled. Each signal sent by the spin step pin, the motor shifts one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuou...

Discover the amazing capabilities of the TB6600 stepper motor driver when paired with an Arduino. This comprehensive guide will walk you through the process of interfacing these two powerful components. By following this guide, you'll be able to adjust microsteps, understand pinouts, and even explore code examples. TB6600 Stepper Motor Driver Features The TB6600 is an easy-to-use professional stepper motor driver that you can adjust its microsteps. This module could control a two-phase stepping motor. A key...

EasyDriver Stepper Motor Features If you use a stepper motor in your projects, you will definitely need a controller for that. EasyDriver is a type of driver that controls stepper motors. This module is based on A3967 IC. This module can be used to control bipolar motors.Features;Allowable continuous current: 0.750AMaximum allowable current: 0.850AMaximum allowable voltage: 30VThermal protectionCrossover-Current ProtectionPotentiometer included to limit the current Note It can operate bipolar ...

L298N DC Motor Driver Feature L298N module is used to drive DC motors with a current of less than 2 amps. This module is easy to use. It contains convenient filter circuit and have access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, so it can be used to drive stepper motors too. This driver needs a logic voltage supply to drive t...

DRV8833 Dual Motor Driver Features Today, speed and direction control of DC motors is very important and useful. The H-bridge circuit is one of the most common techniques to control a DC motor. The DRV8833 dual-channel module uses this technique to control two DC motors.This dual H-bridge motor driver can drive two DC motors, a stepper motor or other inductive loads.The driver supply voltage is 2.7 to 10.8V and the allowable continuous current is 1.5A and the maximum allowable current is 2A.Some common...

DRV8825 Stepper Motor Driver Features The DRV8825 module is used to drive a bipolar stepper motor. Only by two pins, you can control the rotation direction and rotation steps of the motor. By each signal sent by the spin step pin, the motor shifts one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuous current per phase without cooling: 1.5AMaximum current per 24V for each phase: 2.5AMotor voltage: 8.2 to 45VThe minimum allowed ...

PWM Signal Generator Module, Stepper Motor Driver Features The signal generator module is used to generate a square pulse with adjustable frequency and duty cycle in 2 different channels. This module has 3 microswitches to adjust the pulses. It also has a micro USB input for powering the module. There are also two other pins for connecting the power supply. The two PWM outputs of this module are independent, and you can generate your desired pulses on them. Features: Operating voltage: 5 - 30V...

L298P Motor Driver Shield Features Today, DC motors are used in the manufacturing many tools and equipments. So, speed and direction control of these motors is very common. A half-bridge circuit is one of the simplest methods to control a DC motor. This method not only controls the motor direction, but also can be used for speed control. This shield is based on L298P IC. The most important features are: Control two DC motors simultaneously with voltage 4.8 to 24V and up to 2A current Schottky diodes ...

L9110 Dual Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are:The allowable continuous current for each channel:  800mA.The operating voltage: 2.5 - 12V.Two control pins for each DC motor.Suitable for toy cars motors.Can control one stepper motor. ...