Search results for: 'sensor infrared arduino'

GP2Y0A02YK0F Infrared Sensor Features Sharp GP2Y0A02YK0F is an IR sensorusing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by ADC channel of the microcontroller. This sensor can be used in industry and especially in robotics. Sharp GP2Y0A02YK0F has an efficient range of 20 to 150cm. Note The sensor's output data would be incorrect at distances less than 20 cm and more than 150 cm. You can download the datasheet of this module here. [wpdm_p...

GP2Y0A41SK0F Infrared Sensor Features Sharp GP2Y0A41SK0F is an IR sensor that uses infrared wave to measure distance. The sensor’s output is analog, which can be easily read by microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. This sensor has an efficient range of 4cm to 30 cm. Note The sensor's accuracy will decrease at distances over 40cm. You can download the datasheet of this sensor here.[wpdm_package id='...

GP2Y0A51SK0F Infrared Sensor Features Sharp GP2Y0A51SK0F is an IR sensor that uses infrared wave to measure distance. The output of the sensor is analog voltage, which can be easily read by the microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 2 to 15 cm. Note At distances over 15cm, the sensor’s output is not accurate (usually shows higher than real value). You can download the datasheet of this module here...

TCRT5000 Sensor Features The TCRT5000 Sensor is used to detect color and distance. The sensor emits an infrared wave and then receives it. TCRT5000 Infrared Reflective Sensor Module is often used in line following robots and object sorting Robots since this module can sense if a surface is white or black. The measuring distances range from 1mm to 8mm and the central point is about 2.5mm. There is also an onboard potentiometer to adjust the sensitivity. TCRT5000 Sensor Pinout This sensor has ...

LM393 Sensor Features The LM393 module is an IR counter that has an IR transmitter and receiver. If any obstacle is placed between these sensors, a signal is sent to the microcontroller. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc. You can download the datasheet of this module here. [wpdm_package id='17841'] LM393 Sensor Pinout This sensor has 3 pins: VCC: Module power supply – 3-5.5 V GND: Ground OUT: Digital...

4 Channel Infrared Module Features This module has 4 IR transmitter and receiver pairs that can be used to detect black and white color as well as obstacles. Each channel has digital voltage output. You can adjust the sensor’s sensitivity using the on board potentiometers. Pinout You can see pinout of IR module in the image below. Required Materials Hardware Components Arduino UNO R3 × 1 4 Channel IR Obstacle Avoidance Proximity Module × 1 Male to Male jumper wir...

TCRT5000 IR SENSOR Features The TCRT5000 sensor consist of an IR transmitter and IR receiver. When the proper voltage is applied to the infrared transmitter, it transmits and emits infrared waves. When these waves collide with an object, the infrared receiver, which is a phototransistor, receives the waves. A phototransistor works like a normal transistor, except that its base is excited by light. Note This sensor works best for objects in the range of 0.2 to 1.5 cm. You can download the datashe...

E18-D80NK Infrared Obstacle Avoidance Sensor Features The E18-D80NK sensor is used to detect obstacles and objects. This sensor works based on transmitting infrared rays. First, the transmitter sends the rays in a direct path. This ray hits the obstacle and returns to the receiver. There is a potentiometer on this module that can be adjusted to change this detection distance from 3 to 80cm. In fact, with this sensor, the obstacle can be detected, but the distance cannot be calculated directly. There is also...

APDS-9960 Infrared Gesture Sensor Module Features The APDS-9960 Infrared Gesture Sensor Module is an advanced device that enables intuitive interaction with electronic devices through hand gestures. This sensor module uses infrared technology to accurately detect hand movements, offering a hands-free control option for various applications. With its ability to recognize gestures such as swipes, taps, and scrolls, the APDS-9960 is perfect for touchless control interfaces, gaming consoles, and smart appli...