3D Printer CR8 Hotend Extruder Fitting 1.75mm Filament
The extruder of any 3D printer that works with FFF or FDM technology consists of two parts, hot end and cold end.
The task of the hot section is to melt the filament and extract the molten material with the desired diameter, And the task of the cold section is to push the filament into the hot section with sufficient pressure and in the calculated amount.
Nozzle: 1.75 / 0.4mm
Thermistor: 100 K NTC B 3950 ± 1%, length 1 meter
Fit to: 1.75 filament
Type: Extruder Set
Installation type: External thread connection
Material: aluminum & stainless steel & brass